Recent content by leddookie

Thank's for your quick answer Mr. Chock. First i must correct machine model, it's a 92EM. In this case, the error would be similar to the 76. I checked for issues with the y315 valve, and everything seemed ok. I noticed that, in the IAR board, the red LED that signs the supply to the y315 was...

Hello friends, Anyone have a clue about error 84? It started to happen one time after other and nothing happens, only the error is on the display .... Best regards

Hello friend, Sorry for the delay... When i installed the display in my costumer machine, i didn't faced any problem... It just worked fine... About the touchscreen, i don't know the model number... It was not replaced... Once i needed a touchscreen for a sakuray printer and i sent fotos of...

I had this problem to... i openned the motor and i found to much oil inside of it...i cleaned it and everything went fine. it seems like the speed feedback from the motor was not good because of the oil. maybe it result with you... Regards

Thanks friend... It seems that you're absolutly right... Best regards, and thanks again...

Hi friends when i initialize a blanket wash or impression cilinder wash or even if i manualy rewind the washing cloth, i allways get the error of cloth in excess. the signal of both sensors are arriving to the ewk boards. i tested the washing devices on other machine and they work fine. I...

Hi friend...Thanks for your reply, the document you sent me is very usefull for battery replacement. But the console software was gone, and the Duplo technician reloaded the programe file to the machine... Everything is ok now... Regards

Hi friends... I was configuring a normal battery exchange on a Mitsubishi touchscreen placed on a Duplo 5000 collator, after that i choose language, baud rate, and so on as usual, but after that i lost the program of the console. The display shows "No data found", it's empty! So i need...

Thanks for your help... My costumer drived me crazy by phone, then i tried some help here and today, when i looked into the machine i found a preset counter for three sheets...the machine was stoped during two days because of this. The operator keeps telling me that he did not made that...

Hi friends... I'm with a problem in SM74 5+L from the year 2006. What happens is just this: just feeding sheets without printing, i have no problems. If i try to print, no matter which unit i choose, the feeder stops after the third sheet is feeded into the machine. No errors are shown on...

Hi friends... If someone needs to find a plasma screen for a Hashimoto Impulse 26, just look for a Fujitsu FPF8050HRUM display!!! Because if you try to search for the reference on the label of the original screen (Fujitsu FTE8050RP-001), you'll find nothing.... Best regards...