No, in my opinion, it isn't capable of replacing hot/foil stamping applications - it doesn't do a bad job with silver and gold but it's not the...
We also have been having jobs stick in the Printing queue even though they are done and they don't show up in the Fiery log. If you delete them...
Wow, it sounds like some of the same issues I am having with our new C7090. I have had the color shift three times within the same batch of 500...
On the C6085 we have the 313; on the C7090 we have the 318L. Until recently the C6085 Fiery wasn't doing too bad except we did have to reload...
It's a combination on the speed thing. The jobs that take the longest to rip and print (because it stops every 20-40 sheets then starts up again)...
We just had an Accuriopress 7090 installed and have been having color and speed issues. Blues are purple, reds are almost orange. We even used the...
I inherited the job of using our Polar 78 ES cutter after someone left. The operation and programming is not so much of the problem and two or...
We have been having the same problem. I discovered yesterday (though I don't know if it will work consistently) that stepping on the pedal that...
What problems have you been having? Do you have an Iridesse or is this feedback from someone you know who has one?
I don't know if you got this resolved but we were having similar problems on our Iridesse (which apparently has some similarities to the 800 and...
We had some static issues - especially with PVC stock or magnet stock. The only way I could get any kind of decent output or stacking (and there...
We had a rocky (very) start with our Iridesse. I have a fault code/troubleshooting journal full of problems from when we first got the press....