XPE-03-4013

Discussion in 'Xerox iGen3 & iGen4 Digital Presses' started by peels, Apr 14, 2017.

  1. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    935
    Location:
    southeast iowa, usa
    after all my power troubles, Im now getting communication with color unit issues.

    XPE-03-4013

    also press fault: xpe-06-4031

    tech here, but her experieince is limited... any help you fine folks could provide would be swell
     
  2. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    935
    Location:
    southeast iowa, usa
    press boots up, CRM1 never shows up in board status during boot. even if you swap it with another color. then when you logon, you get those errors.

    plus that power supply tripped again.

    bad things happenin'
     
  3. bipe

    bipe Member

    Joined:
    Mar 2014
    Messages:
    11
    Location:
    Svendborg, Denmark
    Got that fault, a while ago, a transformer assy unit, was the one that caused the fault. It was the one located right behind, where the Magenta 3-charge is plugged in.
    Partnr. 105K28980 for my iGen150, believe it is the same for an iGen4
    We changed it, and it worked again
     
    peels likes this.

  4. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    935
    Location:
    southeast iowa, usa
Loading...

Share This Page