XL105 Locking error in the Varnish unit

Discussion in 'Heidelberg Printing Presses' started by Tecnirick, Sep 2, 2022.

  1. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    Greeting, if someone can allude: Locking error in nail unit at the varnishing unit
     
  2. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    Here is an image of the error.
     

    Attached Files:

  3. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    929
    Location:
    Casablanca
    This error means that the varnishing blanket cylinder is again meshed in the gear train and brought into contact with the impression cylinder (rest position), however the varnishing blanket cylinder is not locked.
    In this case you must check whether the locking is jammed. Either it is pushed aside (incorrectly) or the switch (locked varnishing blanket cylinder) is defective or the signaling path to the control is interrupted
    Ww.patreon.com/adilberg
    Instagram : adilberg.tec
    Bon courage
     
Loading...