Xerox DC250 Printing Troubleshoot

Discussion in 'Xerox Color Laser Printers & Color Copiers' started by JoRo, Feb 12, 2019.

  1. JoRo

    JoRo New Member

    Joined:
    Apr 2016
    Messages:
    4
    Location:
    Germany
    Hi,

    i've got some printing errors with my DC250.
    i already know that i need a new Cyan Drum.
    What i don't know: what is causing these V-Shaped rifts.
    is it the belt or fuser or something else?
    any help is appreciated
     

    Attached Files:

  2. Risu

    Risu Senior Member

    Joined:
    May 2012
    Messages:
    105
    Location:
    Finland
    Fuser
     
  3. Biggs

    Biggs Member

    Joined:
    Mar 2017
    Messages:
    99
    Location:
    Edison, NJ
    It's appearing throughout all colors. Check the fuser and see if you see any serious scratches on it.
    I was leaning toward the transfer belt myself, but since it seems to picking up toner and re-depositing it, fuser may be right.
     
  4. OkiTech

    OkiTech Senior Member

    Joined:
    Jan 2008
    Messages:
    750
    Location:
    NEW JERSEY
    Yep! inspect your fuser especially in the area that corresponds with image flaws. looks like Cyan Drum is not the only part you might need.
     

  5. JoRo

    JoRo New Member

    Joined:
    Apr 2016
    Messages:
    4
    Location:
    Germany
    [Solved] just to give users looking at this in the future clarity.
    the v-shaped stripes were caused by the fuser, as stated by the helpful users above.
    i also changed the cyan, magenta and black drum. now the printing quality is good again.

    thanks for the help!
     
    Risu likes this.
Loading...