Xerox 1000 - 4 over 1 causing press to color adjust every few sheets

Discussion in 'Xerox Digital Presses' started by Kringle, Oct 20, 2023.

  1. Kringle

    Kringle Member

    Joined:
    Oct 2013
    Messages:
    94
    Location:
    California USA
    Xerox 1000 with Fiery command workstation. I have a pdf file that has full color on one side and just black on the back. The press keeps stopping every few sheets to color adjust. Seems very random. The stumble makes the job run at approximately 1/3 speed of a 4/4. Only having this problem when we run the single color black back side of the sheet. Trying to avoid going to rich black on the back, like the cleanliness of the single color black.

    Any ideas?
     
  2. claudinei da silva

    claudinei da silva New Member

    Joined:
    Sep 2020
    Messages:
    4
    Location:
    brazil
    Goodnight friend
    Set on fiery or freeflow for black only texts, check the developer unit and black developer; lack of developer or old developer will cause constant image adjustments
     
  3. Kringle

    Kringle Member

    Joined:
    Oct 2013
    Messages:
    94
    Location:
    California USA
    We have a fiery..... I'm not aware of "black only texts" setting. Can you post a photo of where that is in command workstation?
     
Loading...