Xeikon Tech / Operator Needed

Xeikon Tech:

We are currently looking for an experienced Xeikon Tech / Operator who will be responsible for maintaining and running a Xeikon DCP 500 press.
It has an X-800 digital front end system.

This staff member will effectively operate and maintain our Xeikon digital presses to efficiently produce a high quality product that meets or exceeds customer expectations. Quality is every operator's job. You will be held accountable for the quality of the product produced.

Description: Accountabilities will include but are not limited to:
Setup and operate Xeikon in a safe, efficient manner.
Monitor operation, adjust on the fly and be at your station while press(es) is/are in operation.
Perform repairs and troubleshooting, while maintaining optimum production.
Maintain a clean and safe work environment through the day.
Keep press supplies staged and ready to load.
Perform daily, weekly & bi-monthly maintenance on presses.


Also looking for an iGen3 tech / operator:

iGen3 Tech:

We are currently looking for an experienced iGen3 Tech / Operator who will be responsible for maintaining and running one or more iGen3 110 presses.
It has an Creo digital front end system.

This staff member will effectively operate and maintain our iGen3 digital presses to efficiently produce a high quality product that meets or exceeds customer expectations. Quality is every operator's job. You will be held accountable for the quality of the product produced.


Description: Accountabilities will include but are not limited to:
Setup and operate the iGen3’s in a safe, efficient manner.
Monitor operation, adjust on the fly and be at your station while press(es) is/are in operation.
Perform repairs and troubleshooting, while maintaining optimum production.
Maintain a clean and safe work environment through the day.
Keep press supplies staged and ready to load.
Perform daily, weekly & bi-monthly maintenance on presses.
Have a willingness to learn the companies’ other digital presses and graphic operations.

 

Hi,if still interested we can talk