Xante Impressia with iQueue - Edge to edge ?

[Impodave]

I have a large catalog envelope job that I need to run the image to the edge on the trailing end of the envelope.

I have three edge printing turned on in iQueue and in the main menu.

I can only get within 1/8 of an inch, any closer and it starts cutting off the image. What am I missing ?

Thanks.

 

[mludwig]

Like almost every other printer, the Xante image area ends 1/8" from the envelope edge. The three edge printing property doesn't fix that. Any way you could reduce your print file just a tad, like 99%, without messing up a barcode? Anyway, that's been my experience.

 

[Impodave]

Like almost every other printer, the Xante image area ends 1/8" from the envelope edge. The three edge printing property doesn't fix that. Any way you could reduce your print file just a tad, like 99%, without messing up a barcode? Anyway, that's been my experience.

For anyone that's interested in what I ended up doing :
This was a 9 x12 catalog envelope , with the flap tailing to the right. The back is blank, but the front has screened art that bleeds off the right edge (at the flap end).

I basically 'lied'to iQueue, and created a media size called 9x12.5 Catalog. I was able to move the image within a 64th of the edge, which is good enough for government work.

This what was Tracy had suggested earlier on ....