Wohlenberg Stop Signal is too long

Discussion in 'Book Binding' started by benjib, Nov 22, 2020 at 11:56 AM.

  1. benjib

    benjib Member

    Joined:
    Jul 2019
    Messages:
    12
    Location:
    Romania
    Hello
    At Wohlenberg Book Binder we have this error The Stop Signal is too Long.
    It appears even on power on the machine.
    Also the next message is "Maybe one stop actuator is defective"

    Any suggestion is welcomed.
    Thanks.
     

    Attached Files:

  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,659
    Location:
    Managua,Nicaragua
    Hi sir:

    Try to exchange one by one, and disconnect the other and see if the Error disappear.

    Otherwise, you must replace it.

     
  3. benjib

    benjib Member

    Joined:
    Jul 2019
    Messages:
    12
    Location:
    Romania
    Hello,
    Problem solved. Actually one of the stop buttons had bad contacts. The error reffers to the actually stop signal itself that is coming from the stop buttons. A longer time pressed on the stop gives this error. But is not in the manual.
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,659
    Location:
    Managua,Nicaragua
    Good sir

    Blessing
     
Loading...