What Is The Required Humidity

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by gavywill, Jun 20, 2012.

  1. gavywill

    gavywill Senior Member

    Joined:
    Jun 2012
    Messages:
    101
    Location:
    UK
    Need To Find Out What The Required Humidity Is So We Can Maintain It On The Nightshift As The Weather Changes It Over Night.
     
  2. richman

    richman Senior Member

    Joined:
    Nov 2011
    Messages:
    123
    Location:
    Rochester, NY USA
    20% I believe.
     
  3. MarkD

    MarkD Senior Member

    Joined:
    Apr 2012
    Messages:
    344
    Location:
    UK
    20% - 85%. The most critical thing is that it is constant and does not wander so if you set it at 30% keep it +/- 5 %. If you give me your serial # I can pull down a log from the server and let you know how your enviroment is doing - that is if your machine is pushing CFA logs :)

    --
    Mark
     
  4. lopeza

    lopeza Senior Member

    Joined:
    May 2012
    Messages:
    56
    Location:
    western ny, usa
    Environmental Data
    NOTE: Complete environmental operating limits are contained in the Xerox iGen3 Installation Planing Guide (IPG)
    located at iGen3 Installation Planning Guide.

    Base system operating limits
    Temperature range: 55%F - 85%F (12%C - 29%C) Relative humidity: 20% - 85%

    Altitude (above sea level)
    • Up to 6000 ft. (1830 meters): standard installation
    • 6000 ft. (1830 meters) to 9000 ft. (2750 meters): special kits and adjustments required

    NOTE: Temperature, humidity, and altitude are interdependent. Refer to the IPG for complete
    environmental requirements.

    Angel
     

  5. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,113
    Location:
    southeast iowa, usa
    I get errors when the humidity fluctuates (given thing her in the midwest) After a storm, when all the moisture is gone and it cools off....
     
Loading...