Water system problem (not detected) body 4, Sm 74

Discussion in '4-Color Offset Presses +' started by Paulo Ferreira, Mar 14, 2024.

  1. Paulo Ferreira

    Paulo Ferreira Member

    Joined:
    Feb 2024
    Messages:
    15
    Location:
    Paraguay
    Hello, I am having a problem in the body 4 water system of a 1996 Sm 74, the system has water and we have already verified that the sensor works. which it normally can be. What other problem could it be? It is a machine that was recently installed and is not yet operating.
     
  2. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    865
    Location:
    Casablanca
    Please check variant key with original one .
    Check also communication cable between cpc and principal cabinet
    Be sure that lvt connexion on the 4 unit are good , clean dirty and put correctly plugs
     
  3. Paulo Ferreira

    Paulo Ferreira Member

    Joined:
    Feb 2024
    Messages:
    15
    Location:
    Paraguay
    Hello, thank you for your response,
    - where are the LVT connections located? under body 4?
    -Would it be to check the cables of the main cabinet and the CPtronic?
     

  4. Paulo Ferreira

    Paulo Ferreira Member

    Joined:
    Feb 2024
    Messages:
    15
    Location:
    Paraguay
    It could be solved, the water sector cable was defective.
     
Loading...