Water pan motors are missed

Hi guys,
Recently I installed an used SM102-6P3 year 2001. I put the machine in operation afterwards, but without a certain reason, SAK2 board got a problem and the license lost. I replaced SAK2 with a new one and import the new license, but the machine is not recognizing any auxiliary drives after initialization. Only pile motors are defined on CP2000. This machine was modified in 2008 and it has new IPC, MC4 series with Prinect V46.8. In Heidelberg Service Menu, INFORMATION, all HAK2 boards are recognized with the versions 42.0, but I can see only HAK_1 in the sub menu of "Auxiliary drives". All the connections from LTR to the auxiliary motors, boards, motors are OK.
I'm not sure about the Variant Codes are correct or not, there is sheet with machine.
I appreciate any help from you guys.

Regards,
Mathew

 

call atech and reinstall variant code that came with machine