Vogel Grease Pump, doesn't want to run when needed.....

Discussion in 'Heidelberg Printing Presses' started by Metalman, Aug 22, 2016.

  1. Metalman

    Metalman New Member

    Joined:
    Aug 2016
    Messages:
    4
    Location:
    Port City Press, Baltimore, Md.
    We have a Vogel KFG 1-2/S9 grease pump, that only wants to run if you turn off the main power to the whole press, then back on. It will come on then about after it has gone through it's cycle, about 5 mins, it will stop, and never come back on. Mean while the alarm is going off the whole time while you are running the press!!!! Anybody have an idea to what is going on with this problem?? It is diffently a electrical problem, but where?
    This press is a Speedmaster 102 SP, 72 x 102 cm, serial # 536 762

    Now I find out that the switching valve does not want to switch when it is supposed to :(
     
    Last edited: Aug 26, 2016
Loading...