The prints are evenly crossed (RICOH 901s)

Discussion in 'Ricoh Color Laser Printers & Color Copiers' started by xuonginnhanh36, Dec 4, 2018.

  1. xuonginnhanh36

    xuonginnhanh36 New Member

    Joined:
    Jul 2018
    Messages:
    1
    Location:
    Viet Nam
    Currently I am using a ricoh 901s printer, when prints are printed with evenly spaced strips, is this problem related to laser unit? If I replace the laser unit, what parameters do I need to enter because I do not have these parameters, I'm looking forward to detailed instructions, thank you very much,
    Please see the image below
     

    Attached Files:

  2. Risu

    Risu Senior Member

    Joined:
    May 2012
    Messages:
    105
    Location:
    Finland
    Looks like "line raster". Can't you change the raster type or lpi?
     
  3. Biggs

    Biggs Member

    Joined:
    Mar 2017
    Messages:
    92
    Location:
    Edison, NJ
    You can only change toner dither back to a dot matrix.
    Although, unless someone changed in to line screen, that may not be the issue.

    Changing of the laser is one service i've never performed, so I can't help much there

    I assume the drums and transfer belt are in good shape?
     
Loading...