Tehnotrans Problems

need advice....., tehnotrans in my roland r706 is always need to refill the water about 20 or 40 ltr every 8 hour production, is normal.....??

 

yes there is a leak

 

It s not normal sir

 

@BennyAyung
I calculated it approximately by alcohol at 10%. With a large amount of printing, the water consumption in A1 format is about 30-40 liters in 8 hours.
If the workshop is dry and hot, then the consumption may be higher. Take a look under the machine, a leak implies a puddle of water

 

Thank you very much for the advice.....

 

Never seen so much water used