Tehnotrans Alfa C 90L, error 095

Discussion in 'Ryobi Printing Presses' started by Mehanka Abortmaher, Apr 22, 2022.

  1. Mehanka Abortmaher

    Mehanka Abortmaher Member

    Joined:
    Apr 2022
    Messages:
    29
    Location:
    Russia
    Good day.
    Problem with Tehnotrans Alfa 90 L.
    the installation seems to be working, the monitor shows error 095.
    tell me who faced such a problem.
     
  2. Mehanka Abortmaher

    Mehanka Abortmaher Member

    Joined:
    Apr 2022
    Messages:
    29
    Location:
    Russia
    We found a specialist who pressed the buttons and the equipment began to work. What happened he did not say.
     
  3. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    302
    Location:
    Casablanca
    Maybe he just canceled the error message
     
  4. Mehanka Abortmaher

    Mehanka Abortmaher Member

    Joined:
    Apr 2022
    Messages:
    29
    Location:
    Russia
    He did it.
    How did not tell.
    Do you think that we are completely impassable stupid?
    We do not always receive training from equipment manufacturers.
    Often we buy equipment that we have only seen in the picture.
    We are constantly learning, to find out the malfunctions of any anamnesis, machining, welding, grinding, polishing, gluing, electrolytic rubbing, boring beds for offset cylinder boxes.
    We repair electronic boards, reassemble freon refrigerators, mount, dismantle, transport printing equipment thousands of kilometers away.
    DO NOT MAKE ME ANGRY!
     

  5. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    302
    Location:
    Casablanca
    Normally it is impossible to have training on all parts of the machine in a week or two, it is engineering and you need to have a technical basis to understand everything,
    The best way to learn with a minimum of effort is in the long term by trying to correct problems and solve breakdowns with basic technical training and above all common sense.