Technotrans

Discussion in 'Heidelberg Printing Presses' started by Moon Cam, Jul 21, 2022.

  1. Moon Cam

    Moon Cam New Member

    Joined:
    Jul 2022
    Messages:
    1
    Location:
    Cambodia
    I get a fault message from technotrans as below 20220721_102432.jpg
     
  2. Mechanica Speedmaster

    Mechanica Speedmaster Member

    Joined:
    Mar 2022
    Messages:
    36
    Location:
    Slovenia
    Hi Moon Cam,

    1. You have to refil the ink roller temperating system and vent it properly
    2. Readjust the height of swimmer ball (by turning the ball arround its spindel)in the intermediate tank in order to have the right water level
    3. For this job be sure that you switch the main switch off in the CombiStar first after you can take down the cover from the heater, underneath you can find the reset button, push it, the heater should work again
     
Loading...