technotrans is not displayed alcohol level ant temperatur on the cptronic

Discussion in 'Heidelberg Printing Presses' started by wandeyiz, Jun 8, 2022.

  1. wandeyiz

    wandeyiz Member

    Joined:
    Dec 2021
    Messages:
    29
    Location:
    african
    good evening friends, the technotrans TFK-CP10.1 of the SM74 - 4 97, after disconnecting the SVM E40-X2 connector to repair the techno trans, after replacing the connector the cptronic no longer displays the alcohol level and the temperature of technotrans.
     
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Hi
    Try to use another interface port on SVM. Can you see if CPTRONIC is communicating with TFK? You should be able to see software version in Service menu.
     
  3. wandeyiz

    wandeyiz Member

    Joined:
    Dec 2021
    Messages:
    29
    Location:
    african
    thank you friends
    I used the other interface ports on the SVM.
    the same problem, how to proceed to see the version of the techno trans software in the Service menu.
     
Loading...