Static IP Address

We have the CP2000 on a Heidelberg press. We would like to set the static IP address of the press on our network to avoid IP conflicts.

Does the CP2000 software allow this or is this done another any?

 

Hi sir
Hope you are well.
DHCP,(Dynamic Host Configuration Protocol) is the protocol, governs the dynamic assigment IP by a server.
The machine is delivery with Not visible IP configuration,this is provide for DHCP, not Active , but access to the Network
by another protocol called NetBEUI.
The DHCP, only can activated in the touch screen, if there are DHCP server in the Network.
The ”Activate DHCP”pushbutton can be used for
selecting whether the CP2000 client should alternatively
be operated under TCP/IP and, consequently,
with a DHCP server.
In this case, the DHCP server
will manage the dynamic assignment of the IP addresses.
In the service display ”TCP/IP input”, the IP address,
the subnet mask and the standard gateway of the
selected network board can be entered.
Let me know, any question