Stahl 56

Discussion in 'Folders' started by Jmac, Oct 21, 2021.

  1. Jmac

    Jmac New Member

    Joined:
    Jul 2020
    Messages:
    3
    Location:
    Uk
    Hi
    I wondered if anyone could help me .I have recently got a stahl folder 56 6 plate (1996) and seem to have the language in German and need to change it to English.
    I need to turn the folding knives off and adjust some other settings.
    I do mot have a manual and would apreciate any help !!
     
  2. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    101
    Location:
    india
    Hi.
    At main card there is jumper between pin 1-2 .
    Change jumper to 2-3 in power on mode. Then you will able to change all setting (factory settings)
    You can easily chage laungue also
     
  3. Jmac

    Jmac New Member

    Joined:
    Jul 2020
    Messages:
    3
    Location:
    Uk
    Thanks ashok
    I will try this out asap,
    I will also try and fit an operators manual ..
    Many thanks !
     
Loading...