Solution for POLAR-66 Display Issues

Discussion in 'Cutters and Trimmers' started by OkiTech, Oct 3, 2016.

  1. CZAR

    CZAR New Member

    Joined:
    Sep 2019
    Messages:
    2
    Location:
    California
    Okay, Thanks.
     
  2. OkiTech

    OkiTech Senior Member

    Joined:
    Jan 2008
    Messages:
    823
    Location:
    NEW JERSEY
    Read my previous messages in this thread. I explained my original ways, findings. Not a rocket science. Lcd itself is generic - Hitachi, all that had to be done was adopt a connector for backlight, splice, resolder and isolate 2 wires, no polarity issues as the feed AC.
     
  3. manifestus

    manifestus New Member

    Joined:
    Feb 2012
    Messages:
    2
    Location:
    Romania, Suceava

    Hi,

    Can you help me?

    I have the same problem with mypolar 66.

    Thx
     

    Attached Files:

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    Normally when this hapen in LCD, the display you must replace, sorry

    However, you must test the power supply, when installing the new one.

    Happy New Year
     
  5. PWInc

    PWInc Member

    Joined:
    Sep 2020
    Messages:
    56
    Location:
    Canada
  6. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR
    Dear Friends,

    We sell no LCD, CCFL, HV inverter, nor other electronic components, however we repair such Polar screen systems and corresponding Polar Mohr PCB cards. Also, it is offered a prepaid in-machine inspection of Polar Cutters for location an actual fault source(s) for local customers, and a prepaid remote e-mail/phone consulting for abroad customers.

    As well, significant efforts are invested in reverse engineering of the Polar Mohr TFT-LCD Display Systems in attempt to replace them with the standard video interfaces as VGA and others. So, any relevant technical information for the corresponding machines are welcomed from you.

    And now again, for your kind attention and ordering (Rev. 5.00 already with TFT -LCD & LED Displays):
    http://www.alonex.com/pdf/AX-PLR.pdf
    AX-PLR-500-5.jpg

    Your properly formed direct inquiries and orders are welcomed, and should be followed after your organization formal data and technical details of your LCD display system providing!

    Regards,
    Alex Sapiro
     

    Attached Files:

  7. Vesselin

    Vesselin New Member

    Joined:
    Nov 2022
    Messages:
    1
    Location:
    Sofia, Bulgaria
    Hi, I have the same issue, and I'm interested in haow can i fix this without changing with new.
     

  8. PWInc

    PWInc Member

    Joined:
    Sep 2020
    Messages:
    56
    Location:
    Canada
    You can't fix the LCD. You need to replace.
     
Loading...