Sm74-2

Discussion in '4-Color Offset Presses +' started by Beguin, Nov 21, 2020.

  1. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    151
    Location:
    Côté d'ivoire
    Hi to you, need help.
    Not suddenly the machine does not turn even though the brake is released.
    Normally the brake does not release and the machine does not turn.
    We have this fault DYN test 7FEF.
    Please help
     
  2. Maher Sayed

    Maher Sayed Member

    Joined:
    Nov 2017
    Messages:
    81
    Location:
    Egypt
    What dyn code module?
    MOT? BLT-CON? SLT?
    send aphoto please
     
  3. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    151
    Location:
    Côté d'ivoire
    problem solved thank you.
     
  4. mesfin yesmaw

    mesfin yesmaw New Member

    Joined:
    Dec 2020
    Messages:
    1
    Location:
    ETHIOPIA
    Dear sir; we have sx -74-2-p , as we tried to changeover to straight mode , it starts but after some minutes the process will abort. how shall we do?
    with regards!
     
  5. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    151
    Location:
    Côté d'ivoire
    hello sir, be explicit in your explanations, and when the machine stops what does it mark on the screen? see what it marks on the desk of the margin when the machine stops and at the reception thank you.picture
     
  6. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    858
    Location:
    Vermont
    Beguin... it would be nice if you offered a bit of an explanation as to how you solved your problem. I consider it to be in poor form to not offer your solution after seeking suggestions.
     
  7. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    151
    Location:
    Côté d'ivoire
    hi dear elder, sorry if I did not have to explain how I was able to solve my problem.After investigations I found this on the picture was not good because on the same part other gives results different from that is in this that I drew my conclusion that the piece in question is spoiled.thank you
     

    Attached Files:


  8. Frederick Hendrik Botha

    Frederick Hendrik Botha New Member

    Joined:
    Feb 2021
    Messages:
    1
    Location:
    Pretoria
    Just my 2cents, I finally got so frustrated failing, that i've decided to outsource. I wish i knew about coredigital.co.za 2 years back when i started. Saves me a heck of a lot of time and money (on failed self-printed attempts)... Just a thought, when outsourcing, discuss a discount on high volume of printing. You could save even more. ;-)
     
Loading...