SM52-2p - Error S-BLT CON

Discussion in 'Heidelberg Printing Presses' started by mihail_c, Nov 9, 2020.

Tags:
  1. mihail_c

    mihail_c New Member

    Joined:
    Nov 2020
    Messages:
    2
    Location:
    Kazakhstan
    Dear colleagues. We got error on our SM52-2p press.
    Init test: S-BLT CON: BFDD
    Dyn test: S-BLT CON: 7FDF

    Could you advise what does it mean?
    Thank you in advance.
     
  2. Beguin

    Beguin Member

    Joined:
    Jan 2020
    Messages:
    99
    Location:
    Côté d'ivoire
    Init test

    1)Power part test cannot to carried out,condition for testing not fulfilled (in most cases supply voltage). Press does not start running.
    2)câble connection to rotor position encoder interrupted.

    Dyn test

    Rotor position encoder defective (identical signals from all sensor lines, wrong logic)
     
    mihail_c likes this.
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,735
    Location:
    Managua,Nicaragua
    Hi sir:

    for Init S-BLT CON : BFDD:

    Check:
    Connection cable for encoder stopped rotor position .

    Dyn: S-BLT-CON: 7FDF
    Check:
    Position encoder faulty rotor ( identical signals from all sensor lines )

     
    mihail_c likes this.
  4. mihail_c

    mihail_c New Member

    Joined:
    Nov 2020
    Messages:
    2
    Location:
    Kazakhstan
    Thank you every body for answer. It helped Me alot.
    My solution is: I have dismounted encoder of main motor. Cleaned it and connector from oil. Everything works well now.
     

  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,735
    Location:
    Managua,Nicaragua
    Great, Good job
     
Loading...