SM102 auto grease not able to reset

Discussion in 'Heidelberg Printing Presses' started by micsabri, Sep 24, 2021.

  1. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    My SM102 is not able to reset the cycle count automatically on auto grease, so I am running the machine with "beep" sounds at all time. I suspect the electronic board problem but do not know which board is it? Anyone know which board? Thank you very much.
     
  2. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    By the way, this part is working fine. So, I suspect is electronic board problem cause it cannot be reset.
     

    Attached Files:

  3. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    What type of grease do you use? Send a photo.
     
  4. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    Fill grease and stir it well if there's air pocket wont flow
     
    MRTYMM likes this.
  5. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    This is the photos.
     

    Attached Files:

  6. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    Already filled and stir, but still the same. Not able to reset automatically.
     
  7. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    You have a problem in circuit number one, check the sensor
     
    asem alsafady likes this.
  8. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    All sensors checked, motor pump working until overload to delivery chain and jogger side.
    Can I know where is circuit number one?
     
  9. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Sir
    As per the pix you grease lubrication (1) is not done you have to reset the same
    Procedure put the machine in slow running (3k rpm) and activate the sensor (1) for 3times with interval of 3sec on 3 off
    In the same way reset the second sensor also
    Now grease button will be come
     
  10. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    I have tried the same, not working. I suspect maybe the board having issue, but I have no idea which board is that.
     
  11. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    Swap between EAK 12 and EAK 15
     
    asem alsafady likes this.
  12. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Once you activate the sensor with metal strip then at lubrication menu icon color will change if icon is not getting change then maybe there is wire broken or card faulty.
    As above swap the eak 2nd position and 3rd position (count from left side)
     
  13. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    Count from right side.
     
  14. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Yes from rightbside
     
  15. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    Can I know where is the EAK boards located?
     
  16. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    Second row (from top) in main cabinet
     
    asem alsafady likes this.
  17. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    Sir, my EAK12 slot is empty (without card) and teh EAK12 is the last slot, means there is no EAK13,14,15...etc.
    By the way, there is no card for EAK3, EAK11, EAK12, REK3.
     

    Attached Files:

  18. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    Swap between second EAK board (located in second position) and third EAK board (located in forth position), start from right side.
    All EAK boards are located in second raw
     
    asem alsafady likes this.
  19. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    Hi sir, do you mean swap like this? I draw with yellow mark.
     

    Attached Files:


  20. micsabri

    micsabri Member

    Joined:
    Sep 2021
    Messages:
    48
    Location:
    Singapore
    Sir, I have swap both EAK but seems still the same. Do you have any idea where is the reset counter?
     
Loading...