SM-102 clamp bridge in radiation zone

Discussion in 'Heidelberg Printing Presses' started by Tecnirick, Aug 28, 2023.

  1. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    Hola, SM-12 bridge of tweezers in radation zone. ( what does it mean)
     

    Attached Files:

  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    543
    Location:
    Kolding-Denmark
    Hi,
    Change the language to English and send the photo.
     
  3. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    Barras de agarre en la zona del radiador
     

    Attached Files:

  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    543
    Location:
    Kolding-Denmark
    The machine should run in idle speed while the dryer is on. What is the main problem?
     
  5. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    The machine operator says that when he inserts plates the yellow warning appears and stops the machine.
     
  6. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    543
    Location:
    Kolding-Denmark
    What type dryer does it have?
     
  7. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    or when cleaning the blankets and cylinder that rotates the machine slowly, it stops
     
  8. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    This machine does not have a dryer star
     
  9. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    929
    Location:
    Casablanca
    Please give me the plate of this machine to see the type , and year
     
  10. Tecnirick

    Tecnirick Member

    Joined:
    Nov 2021
    Messages:
    23
    Location:
    Rep. Dom.
    hello, thank you very much, here is the plate of the machine
     

    Attached Files:


  11. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    281
    Location:
    Connecticut
    Check the finger guards and make sure all plates are tight.
     
Loading...