Shore hardness of ecocolor roller 26

[Alistair Tinsley]

Hello.
Could someone please advise me on the shore Hardness of roller 26 as shown in the diagram or details on where I could get it.
I have no measurement tool
It is a Heidelberg PM 74
Thank you for your Help
Alistair

 

[Adil]

Hi sir
the hardness of the damper rollers is 25 degree shore, the mixed rollers 38 degree and the UV rollers 40 and the damper rollers UV 32 degree shore this for anyone who needs this information, the hardness is then measured in 5 points on the rollers with a durometer (3 points in the middle with a phase shift of 120 degrees and the remaining two at the roller board at a distance of 1/10 of the length of the roller) the average measurement of these 5 points gives the exact hardness of the roller.
Good luck

 

[Alistair Tinsley]

Thank you.
I appreciate your help
Member

 

[Adil]

Be welcome