Shinohara perfector changing error

Discussion in '4-Color Offset Presses +' started by Camilo, Jan 22, 2024.

  1. Camilo

    Camilo Member

    Joined:
    Mar 2019
    Messages:
    27
    Location:
    Bogotá - Colombia
    Hello dear Members,

    I´m wondering if anyone on the forum may help me with this problem:
    We were changing from the perfecting system to the straight mode but the machine blocked on the second step, the cilinder is able to spin manually but it seems as the machine cannot detect it, attached are the images of what is shown in the control panel:

    shinohara perfector error 01.jpeg
    shinohara perfector error 02.jpeg

    and the page of the manual that says nothing on how to fix it:
    IMG_8090.jpg


    any help would be greatly appreciated.

    best regards
     
  2. Joe Burger

    Joe Burger Member

    Joined:
    May 2023
    Messages:
    14
    Location:
    Germany
    Do you have a air-pressure problem ?
     

    Attached Files:

  3. Camilo

    Camilo Member

    Joined:
    Mar 2019
    Messages:
    27
    Location:
    Bogotá - Colombia
    Thanks for your reply Joe,

    we are going to check it, the machine is running now but we´ve been afraid to activate the perfector again... with this info we´ll try it.
    May I ask from which manual did you get that pic?

    Best regards!
     
  4. Joe Burger

    Joe Burger Member

    Joined:
    May 2023
    Messages:
    14
    Location:
    Germany
    Hello, years ago I worked for Shinohara Europe in Germany and just took a look into the manuals from that time, from 2012. How you get it back to straight?
     

  5. Camilo

    Camilo Member

    Joined:
    Mar 2019
    Messages:
    27
    Location:
    Bogotá - Colombia
    Hello Joe thanks for your help, the system now is working, when we change to straight it does it flawlessly, the problem is when getting the perfector function back, it shows the error that I´m sending pic and we have to press the button several times for it to work, so I guess that it may be a pneumatic, we´ve checked also the pneumatic cylinders and they seem to be ok, any idea on how we can solve it?

    Best regards
     

    Attached Files:

Loading...