Sheet delivery

Discussion in 'Heidelberg Printing Presses' started by PrintEdge, Apr 23, 2020.

  1. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    Sorry to say that I have no schematic right now, but if he can send a photo of the cabinet, then I can help.
    Anyway, there is no other timers in the cabinet.
     
  2. PrintEdge

    PrintEdge Member

    Joined:
    Apr 2020
    Messages:
    12
    Location:
    Tennessee
    This photo I’ve uploaded is the timer you are referring to?
     

    Attached Files:

  3. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    No
    It is circuit breaker current adjusting.
    Please send a photo of the horizontal control cabinet
     
  4. PrintEdge

    PrintEdge Member

    Joined:
    Apr 2020
    Messages:
    12
    Location:
    Tennessee
    This photo I’ve uploaded is the timer you are referring to?
    I’m not at work right now but I do have a photo that I consider to be a timer that I’ll upload.
     

    Attached Files:

  5. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    Yes, this what I mean, please note the original position and try to readjust it
     
  6. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    That is the face of one of the timers, but look in your electrical drawings to determine which is forward inch, reverse inch and obviously, the third one as Maher mentioned, would be the one you're looking for.
     
    PrintEdge and member 18943 like this.
  7. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    He should mark the original position of the three timers, in case he turned the wrong one
     
  8. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    For sure, Maher! It seems to me that finding the forward/reverse in the schematics would be easy for him.
     
  9. PrintEdge

    PrintEdge Member

    Joined:
    Apr 2020
    Messages:
    12
    Location:
    Tennessee
    As I am not at work currently, taking a photo of this timer I can put back if need be. I will let this forum know if this remedies my issue. Thanks for yours and junker1984 input.
     
  10. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    You are welcome
     
    PrintEdge likes this.
  11. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    You're welcome, Print. Hope Maher's info gets you what you need. Mechanically speaking, though, your machine should be leaving a sheet at the stops... Stops continue to sweep, but not raise, upon trip off.
     
    PrintEdge likes this.

  12. PrintEdge

    PrintEdge Member

    Joined:
    Apr 2020
    Messages:
    12
    Location:
    Tennessee
    Just an update on this issue, the K113 switch WAS bad which IS a timer relay function for the delivery sheets. The new switch has to be retrofitted because of wiring issues, by the way is $1030.00 from Heidelberg. A little excessive pricing but never the less needed. You’d think for this cost they’d have a retrofit kit included as I had to come up with my own.
     
Loading...