Penta
New Member
- Joined
- 2026
- Posts
- 4
- Geo
- slovenia
Hello everyone, I have a problem with the machine, red LED in all positions of the switch (delta) when I turn off the 4140 board (comparator board) the LED diode turns off.
When I turn on the machine (with the 4140 board on) and when I press the buttons on the keyboard for manual movement of the back plate(backgauge), the measurements on the screen come but an FF error also appears. Next, if I type a measurement on the keyboard and press the operation button, the computer freezes (the keyboard does not work either) and the knife after the first cut is blocked
If I turn off and turn on the machine again and if the back plate is moved only manually with the buttons, the knife goes down without a problem, I can move the back plate to any measurement. What could be the problem? Thanks.
When I turn on the machine (with the 4140 board on) and when I press the buttons on the keyboard for manual movement of the back plate(backgauge), the measurements on the screen come but an FF error also appears. Next, if I type a measurement on the keyboard and press the operation button, the computer freezes (the keyboard does not work either) and the knife after the first cut is blocked
If I turn off and turn on the machine again and if the back plate is moved only manually with the buttons, the knife goes down without a problem, I can move the back plate to any measurement. What could be the problem? Thanks.
