Schneider senator mc2

Discussion in 'Cutters and Trimmers' started by andy martin, Oct 18, 2018.

  1. andy martin

    andy martin Member

    Joined:
    Aug 2016
    Messages:
    16
    Location:
    bradford po
    Help please intermittent fault. Cut started half way down knife stops. Barrier clear cannot engage knife change. Led for knife stop at extreme left of machine control buttons comes on and cannot be turned of . If machine turned of and left for an hour or two machine can be wound back up and used again
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,149
    Location:
    Managua,Nicaragua
    Hi sir
    Please do this: use the schematic diagrams
    1)cam switch defective
    2)or wrong adjusted
    3) test +24Vdc for the electronic, some electronic components, like: capacitor, transistor, or Bridge rectifier : leakage or faulty.
    Let me know
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441
     
Loading...

Share This Page