Schneider Senator 115 Blade Not Coming Down

[pformagg]

HI All
I have an issue with Schneider Senator 115 E-Line. When we go to cut, the clam comes down ok, but the reset light goes blue.

ERRBUF code is 41C1C1

Attached is the ERROR Screen.

 

[CHOCK]

Hi sir:

PLEASE RESET THE BUTTON .

Possible failure in board PRINT 42110 to failsafe cut system power board , measure regulated power supply + 24 Vdc + 5VDC +12VDC

 

[pformagg]

Thanks, Chock. What do you mean by "PRINT 42110 to failsafe cut system power board"

 

[CHOCK]

# of board in the schematic wiring electrical diagrams.

Blessings

 

[ashleysarlo]

Hello. CHOCK the schematic wiring electrial diagrams. i have a schneider senator pc2. and the electricians cant understand the problem...

 

[CHOCK]

ok Sir:

Please review carefully the regulated power supply in Tolerance: 0.7% up or down. and repair or replace.

Test any cables for open, or corrosion, and tight very well all the wires in the boards, and relais, and contactor.

Finally IF the problem persist, RESET the CPU.