Sakurai Oliver 258 EP II perfector error

[Antonio Cortez]

Problems with the Perfector
Changing the print mode from straight to Perfector the machine left with an error that we cannot remove.
The errors are:
1. all three transfer cylinder lights are flashing (air pressure is ok, crank not on)
2. when we rotate the machine with the crank it reaches a point where the error alarm is activated and manual rotation is blocked
best regards

 

[CHOCK]

Please proceed to the Step before to the straight mode carefuly!

This is the best solution, that you will have, otherwise, you will need to make a complete troubleshooting in the perfector Unit; electrical/ electronic/pneumatic/mechanical/ hydraulic.

 

[Antonio Cortez]

We already tested but the fault prevails