Sakurai consol problems

Discussion in '4-Color Offset Presses +' started by Michael Horan, Oct 18, 2017.

  1. Michael Horan

    Michael Horan New Member

    Joined:
    Oct 2017
    Messages:
    1
    Location:
    Sydney
    Can any body help?
    My printing consol on a sakurai 575SD in not communicating with my ink ducts properly. It’s not indicating errors and with unit 3 plugged in all ink ducts are reading e6 which is a communication error.
    Thanks
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,415
    Location:
    Managua,Nicaragua
    Hi sir
    Hope you are well.
    His problem with console, is lack of good contacts connector, please1) Tight all connector in the console Turn OFF, the panel, and see for dirty, loose, broken, or oil, or corrosion. 2) Reset all C.breaker inside of Console 3) Ther error e6 in unit 3 the type of disk is NOT o.k, when was formatted, the format Was incorrect , Try to select the indicate format for the machine 2DD/2HD. 4)Try to clean the Head for Disk or Floppy, with some special tool, like Clean disk, or another device available coming with the machine, or some computer store.
    Let me know, any question or doubt
    Blessing.
    superchock@yandex.com
    cell+WhatsApp:+150588611441
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,415
    Location:
    Managua,Nicaragua
    Did you fix it SIR?
    Let me know, any question or doubt
    Blessing.
    superchock@yandex.com
    cell+WhatsApp:+50588611441
     
Loading...