Ryobi 780E E-H1008 Error

Discussion in 'Ryobi Printing Presses' started by bravehart, Mar 1, 2018.

  1. bravehart

    bravehart New Member

    Joined:
    Mar 2018
    Messages:
    3
    Location:
    SPAIN
    Hi, friends
    I just have a problem with Roybi 780E, error E-H1008 after switch on the machine,
    we'll be very thankful for your insights on my problem.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir
    Good day, hope you are well
    Normall when you turn on the machine in Ryobi, the RAM memory in the CPU , check all is everything is o.k
    When something is missing, maybe the buzzer will beep, indicating something is wrong.
    I recommend yo
    1)first: Measure the level Voltage of battery backup of the MOBO(Mother board). and clean any sensors very well
    with water very soft. and tight any plug and clean with special Electronic cleaner contacts.
    2)Try to tight any wires +plug of console of the machine.
    You can test the sensor with the camera of his cell phone, since they are I.R the lens of camera will detects if ON. otherwise replace it.
     
  3. bravehart

    bravehart New Member

    Joined:
    Mar 2018
    Messages:
    3
    Location:
    SPAIN
    Thank you. I will try to check all connections and sensors. When the problem appears, the screen counter does not advance.
     
Loading...