Ryobi 662pfh help

Discussion in 'Ryobi Printing Presses' started by glenner, Nov 28, 2016.

  1. glenner

    glenner Member

    Joined:
    May 2010
    Messages:
    26
    Location:
    toronto,canada
    Still having lots of trouble with our used Ryobi 662pfh manly waters we are alcohol free useing the same mix as our komori press but scums in just running type and we are running the metering roller setting at two clicks from high water

    any pressmen that have run this press I could use your help

    Glenn
     
  2. ryobiTech

    ryobiTech Member

    Joined:
    Nov 2016
    Messages:
    28
    Location:
    the world
    Scumming

    Have you checked your form to oscilator and metering to oscilator pressures?
     
  3. glenner

    glenner Member

    Joined:
    May 2010
    Messages:
    26
    Location:
    toronto,canada
    yes we have checked all roller settings . now we are having trouble with an E 6 water error in one unit and an other unit the console will not let us turn up or down the water ?

    Glenn
     
  4. Kelsey Holt

    Kelsey Holt Member

    Joined:
    Nov 2017
    Messages:
    6
    Location:
    Nashville TN
    E6 that’s a water motor code.
     
  5. ryobiTech

    ryobiTech Member

    Joined:
    Nov 2016
    Messages:
    28
    Location:
    the world
    Can you tell me what , plates , fountain solution and ink you are using. E6 could be a fault with the damper motor.
     

  6. Kelsey Holt

    Kelsey Holt Member

    Joined:
    Nov 2017
    Messages:
    6
    Location:
    Nashville TN
    Starfount it’s a 2 step. It’s I belive HT180 and SF72 3 oz of each per gal.
     
Loading...

Share This Page