Rubber Roller Specifications

[Rathnakumar]

Hi all,

I'm looking for the measurement specifications of all types of Rubber Rollers used in Heidelberg (All models)

Would be very much helpful if anyone share those details in here or to my below email id

Thanks in advance

Rathnakumar
rathnakumar_11@yahoo.co.in

 

[aqazi81]

Some Copy/Paste work from a Heidelberg document below.

Inking rollers must be adjusted
to be oil-friendly (or oleophilic). In an inking system with conventional inks,
rollers of Shore A hardness between 30° and 35° are used. For UV inks,
rollers with Shore A hardness of 25° and between 40° and 45° are used.
Dampening rollers should be water-friendly (hydrophilic). For alcohol
dampening systems, Shore A hardness of between 25° and 30° is suitable.
In direct dampening systems, hard rubber rollers are used.

The Shore hardness of a roller determined with a Shore meter designates the resistance against penetration of a needle taking the form of either a conic section (Shore A) or a point (Shore D), pressed with a defied force (1 kp) for a period of three seconds against the rubber surface.
Soft rollers are measured with Shore A, and hard rollers with Shore D. The
general hardness tolerances according to DIN/EN are +/– 5° Shore A.

Hope this helps.

Asif

 

[praba425]

Profitip from Heidelberg

Dear Rathnakumar
Hope this pdf with all roller information will be useful for your requirement
BR
Praba

 

[Rathnakumar]

Thank u Mr.Asif

 

[Rathnakumar]

Dear Rathnakumar
Hope this pdf with all roller information will be useful for your requirement
BR
Praba

Thank a lot Mr.Praba..

 

[PKT FDO]

Dear Rathnakumar
Hope this pdf with all roller information will be useful for your requirement
BR
Praba

hello praba,
can you send these file to my email, kosalathilan.kf@gmail.com . Thank you,
best regard,
kosala fernando

 

[praba425]

Dear Fernando
The attachment is still available above on 23-10-16 post. Please check and download the same
Your e-mail id given above is not responding
Or send another valid email id
BR
Praba

 

[PKT FDO]

Dear Praba,thank you for your help. please send to this address kosala@softwave.lk
thank you,
Kosala fernando

 

[mrheidelberg]

Just click on the link to download to your desktop