Roland200 plate installation problem

Discussion in 'Man Roland Printing Presses' started by EngAmmar, Dec 6, 2019.

  1. EngAmmar

    EngAmmar New Member

    Joined:
    Dec 2019
    Messages:
    1
    Location:
    Saudi arabia
    Hi .. i have a problem when i installing the plate. I have to push it manually to install.

    My initial diagnosis of the problem was time delay happened to ruler.
    1- I adjust the encoder also change it with a new one.
    2- Clean all the unites also
    the problem still.
    Please i need your all advises
     
  2. controlgraphics

    controlgraphics Senior Member

    Joined:
    Apr 2011
    Messages:
    157
    Location:
    Chicago,USA
  3. sergios68

    sergios68 Member

    Joined:
    Jan 2014
    Messages:
    79
    Location:
    Monterrey, Mexico
    looks like you have problem with the plate mounting procedure... first step is to make sure the lateral and circunferential motors are in zero position mechanically and electronically, second: at A side you must have the ruler for the plate cilynder image adjust the arrow must be at zero degrees. these are the basic countermeasures. please let me know the model and serial at ID label for this machine in order to be more helpful. I need more information !!!
     
Loading...