Roland 700 Hi print Help

Discussion in 'Man Roland Printing Presses' started by Isko, Jun 24, 2019.

  1. Isko

    Isko New Member

    Joined:
    Jun 2019
    Messages:
    2
    Location:
    Bulgaria
    I am workin on Roland 700 hiprint with coldfoil and I have a problem with machine. Tthe printing on the sheet make a "rainbow." Please help colleagues...
     
  2. sergios68

    sergios68 Member

    Joined:
    Jan 2014
    Messages:
    26
    Location:
    Monterrey, Mexico
    Please, send more information or pictures about problem. It's not clear what problem you have.
     
  3. Isko

    Isko New Member

    Joined:
    Jun 2019
    Messages:
    2
    Location:
    Bulgaria
    When i do fitting then the problem is in the middle wants either up or down but it's okay at the end of the sheets and can not make fit the colors. Can grapphers be the problem? I can upload a photo later. But if you understand me please help.
     
  4. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    683
    Location:
    Vermont
    as best as I can figure you're referring to the job not fitting between colors. The first thing I would do is to slip in about 100 sheets of a known quality paper to see if this misregister is as a result of bad paper.
     

  5. drukman

    drukman Member

    Joined:
    Mar 2016
    Messages:
    5
    Location:
    Bulgaria
    Tisho knows my phone . Call. Valentin
     
Loading...