Riso RP3700 Duplicator

Discussion in 'Digital Duplicators' started by lrmm, Oct 18, 2011.

  1. lrmm

    lrmm New Member

    Joined:
    Oct 2011
    Messages:
    1
    Location:
    Venezuela
    I have a Riso RP3700 Digital Duplicator and it has stopped making the masters. At first it would make only the first four or five cms when scanning and then nothing. Someone suggested that the duplicator needed re-programmed (we have been told that is one of the main problems with the RP3700). Anyone know how to re-program this model or any other suggestions?
    Thanks...
     
  2. plotter

    plotter Senior Member

    Joined:
    Feb 2009
    Messages:
    376
    Location:
    south wales uk
    check the wires on the back of the machine, on the left hand side at the top there is 4 of plugs, one is power, one is blue and is a jumper to the other board, next to this is a very small 2 or 3 wire plug, check this as if not connected properly your masters will be blank
     
Loading...