Register slow response

Discussion in 'Man Roland Printing Presses' started by northern-andy, Oct 19, 2021.

  1. northern-andy

    northern-andy Member

    Joined:
    Jun 2011
    Messages:
    38
    Location:
    new zealand
    Hi, does any one know how to speed up the response on the register.
    When a unit is selected to move in any given direction the response is very slow and once it does move were constantly chasing the result to get it to settle.
    From where you start out on the makeready to where you end up is a decent distance.
    I've gone to rezeroing the units for each make ready so that plates are going on square but it's a pain as they are all a bit out of alignment anyway.
    I've squirted some penetrating oil along the back edge screws thinking this may help..........
     
  2. Sandeep kumar

    Sandeep kumar Senior Member

    Joined:
    Jan 2018
    Messages:
    122
    Location:
    Gurgaon
    Dear Mr Andy,
    Are you getting problem during production or plate change.
    You can call us at whatsapp 00919810902830
     
  3. drukman

    drukman Senior Member

    Joined:
    Mar 2016
    Messages:
    272
    Location:
    Bulgaria
    And what is your machine, that I forgot?
     
Loading...