R700 stops dead on the run

[Obi123]

Hi all I'm getting my R700 1995 stopping dead during the day, as the day gets on its doing it more and more, with the attached errors. Has anyone come across this before

The machine needs a reboot before restarting again and the longer I leave it between reboots the longer it runs without the error coming back

 

[Sandeep kumar]

Hello,
This might be due to some slave card in SPS loop
Regards
Sandeep kumar

 

[Obi123]

Would there be anyway to narrow it down to a specific unit or panel

 

[Sandeep kumar]

You have to hangout with every unit

 

[Obi123]

Which one is the slave cards? I have many spare boards

 

[drukman]

Come on in...

 

[Obi123]

Thank you for your help. On mine the slot number does not have any board .

It is the moeller computer .

I'm also now having this error.

Process bus: measuring console does not send back data

 

[manrolandchina]

1995 machine, it should be the CPU1 and CPU2 at the right hand side problem. You can take a photo of them, attach here.

 

[Obi123]

1995 machine, it should be the CPU1 and CPU2 at the right hand side problem. You can take a photo of them, attach here.

Correct.

Both CPUs and power supply seem to be working as usual and when observing it whilst it stops there is no change in the LEDs

The only change is the red LEDs on the bus board all jump on and then settle.