Questions regarding reservoir pad printers.

Discussion in 'Print Community General Printing Discussion' started by Ardentfour, Apr 30, 2024.

  1. Ardentfour

    Ardentfour New Member

    Joined:
    Apr 2024
    Messages:
    2
    Location:
    uk
    Hi, I hope this is the correct place to ask about this. If not, my apologies.


    I recently purchased a small manual single-colour reservoir printer and have been considering making a few prints using it. I wanted to ask what type of plates are best/can be used for this method of printing. Can silicone cliches work, or does it require a different type of plate?
    Also is there anything I should know before starting out?

    Many thanks
     
  2. er.bajaj001@gmail.com

    er.bajaj001@gmail.com Member

    Joined:
    Aug 2015
    Messages:
    91
    Location:
    India
    Please Give a Detail about Brand and Attach few Pics if Possible.
     
  3. Ardentfour

    Ardentfour New Member

    Joined:
    Apr 2024
    Messages:
    2
    Location:
    uk
    It's a KOBO printer, or so it says on the machine itself. Here are a couple images of the printer and Inkwell.
    printer.png printer.2.png
     
Loading...