qmdi stop after printing 3-4 copy and show int plus

Discussion in 'DI Presses' started by hoshyar, Oct 13, 2014.

  1. hoshyar

    hoshyar Senior Member

    Joined:
    Feb 2014
    Messages:
    59
    Location:
    iraq-sulaimanya
    dear friend i have qmdi plus stop after printing 3-4 copy and show int plus and there is high sound from the blower any one can help?
     
  2. Risu

    Risu Senior Member

    Joined:
    May 2012
    Messages:
    109
    Location:
    Finland
    Hose broken or some valve leaking?
     
  3. qmdipress1

    qmdipress1 WWW.QMDIPRESS.COM

    Joined:
    May 2009
    Messages:
    184
    Location:
    ct usa
    sounds like your X7 plug is shorting out this plug is located on the SVK 3 board. if you don't take care it damage the board if it has not already.
     

  4. hoshyar

    hoshyar Senior Member

    Joined:
    Feb 2014
    Messages:
    59
    Location:
    iraq-sulaimanya
    stop qm di during second printing

    still i have this problem from time to time check x7 and solder 2 brown cable
     
Loading...