Qm46-2 timing delivery gripper problem

Discussion in '1-Color and 2-Color Offset Presses' started by ALLANB, Oct 29, 2015.

  1. ALLANB

    ALLANB Member

    Joined:
    Oct 2015
    Messages:
    7
    Location:
    New Zealand
    Hi this is my first post so hope someone can help and can make sense of what I'm after.
    Just installed new chains onto press, having problems with delivery / gripper timing,
    either ripping sheet or dropping sheet. Would appreciate anyone who can supply settings for cyclinder roller height; and position of the delivery grip closing cam; and gripper cam settings.
    Cheers from Kiwi printer with problems.
     
  2. Markley

    Markley New Member

    Joined:
    May 2017
    Messages:
    4
    Location:
    Oakland
    Hey Allan, you ever figure out how to adjust the gripper timing? I messed up today and had a tool go into the gripper and everything is out of wack now. Doh!!!
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,584
    Location:
    Managua,Nicaragua
    See his email

    Blessing
     
Loading...