QM 46-2 ERROR

Discussion in 'Heidelberg Printing Presses' started by old school 52, Sep 12, 2018.

  1. old school 52

    old school 52 Member

    Joined:
    Apr 2014
    Messages:
    39
    Location:
    United States
    Anyone know the code for Error 1 / 11-02
    Any assistance would be appreciated
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,155
    Location:
    Managua,Nicaragua
    Hi
    this error is coming by limit switch S17 pile up Feeder, please see for loose wires.
    faulty switch, or lack of voltage , see your schematic diagrams pag 7 .
    Let me know
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441
     
  3. old school 52

    old school 52 Member

    Joined:
    Apr 2014
    Messages:
    39
    Location:
    United States
    CHOCK, this makes sense. I was asked to learn this press, now Im removing years of crud. I was working on feeder area Tuesday. Removed guard above feeder cleaned as good as possible. I noticed the guard is on a rocker bar, probably a limit switch involved. Will press run without guard if the limit switch is fixed? Thanks
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,155
    Location:
    Managua,Nicaragua
    Hi sir
    I was checking the schematic diagrams for your machine, and Do not see any Limit switch for Guard safety.
    In short, you can Run the machine without guard for Feeder.
    Of course there are other safety guards in the machine
    That you must observe, in order to the Run machine. but without guard for Feeder if the limit switch is fixed, can RUN.
    Try it.
    Let me know.
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441
     
Loading...

Share This Page