Problem with SSK2 in Speed master 52
- Thread starter Hadelio
- Start date
junker1984
Senior Member
- Joined
- 2010
- Posts
- 1,287
- Geo
- US, Midwest
You'll have to post more information. Screen shot of display would help, or thorough explanation of problem listing diagnostic codes.
Advertisement:
Hadelio
New Member
- Joined
- 2014
- Posts
- 2
- Geo
- Uruguay
Thank you junker.
The problem start with a problem with the movement of the side lays and pression motors, so the technician think that the problem was in the board SSK2.But before change this board, he reset the SAK2 and when he restart the machine, after put the values of the machine, the machine ask to change from reverse to front, but when you told the machine to do it, the machine seems that is do it the change in the panel but the machine doesn´t do any movement
The problem start with a problem with the movement of the side lays and pression motors, so the technician think that the problem was in the board SSK2.But before change this board, he reset the SAK2 and when he restart the machine, after put the values of the machine, the machine ask to change from reverse to front, but when you told the machine to do it, the machine seems that is do it the change in the panel but the machine doesn´t do any movement
Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
Similar threads
