Problem with QMDI Classic

hello..

i have problem with my QMDI.

machine didnt work for about month, and now..

first.. when im start machine everything was good until i didnt start printing.. 2 paper goes, and 3th stop whole machine.. everything stop.. machine was restarted "int class" only computer stay worked.. but machine was restarted.. vacum cleaners start for secund and turned off..
and.. than.. after a hour, other ...
machine alone start vacum cleaners and i dont have control.. "panic buton" not reaction.. vacum cleaner work and anything other not.. i can only turn off machine..

what can be a problem? thx a lot guys..
Davor.

 

and now.. when im turn on machine.. situation is same.. vacum cleaner work non stop.. and control not work.. i cant do anything..

 

and if i wait to boot qm pc, pc will be boot.. but.. before i get icon for controling machine.. i get "Warning! Comunication error"

 

any mouse that lives inside?

 

This is a yellow conector inside of cabine, that when is warn make this problem, make fake contact and reset the press no thye computer and the air vacum or blaster is gone work crazy... is correct this conector... in the SVK3 and TSK is yellow...

 

Hi Davor,
Augustov is right, it's power supply problem on SVK-3.
The X7 yellow connector with two red wires (32VAC) is losing contact.
The best way to fix this problem is to sold those two wires directly to the SVK-3 board.
Feel free to call me if you are not sure how to proceed.
+43 650 636 73 93 I speak Croatian language.
Best regards
Jan