problem sakurai color console

Discussion in '4-Color Offset Presses +' started by panosmag, Apr 11, 2017.

  1. panosmag

    panosmag New Member

    Joined:
    Apr 2017
    Messages:
    3
    Location:
    greece
    hello.i am a new member.i have problem with my sakurai s oliver 272
    console.computer cant run the console programm
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
    Hello sir
    Good day
    What do you mean with the console is NOT run?
    1)Not turn ON 2) Turn On, but Not work ??
    Please specify and let me know, in order to help you
    Regards
    superchock@yandex.com
     
    Last edited by a moderator: Apr 11, 2017
  3. panosmag

    panosmag New Member

    Joined:
    Apr 2017
    Messages:
    3
    Location:
    greece
    hello and thanks for your reply.console turn on normal but when goes to run the sakurai programm crushed
     

    Attached Files:

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
    i SAW it, the Pic
    Maybe your 1) software or Firmware is Corrupted. 2) The memory depend of your kind of equipement
    New or Old tech, the ROM or EPROM (place where the firmware is load) can be faulty, or Corrupted
    3) Please measure the Voltage to this component +5VDC or 9Vdc or 12 VDC Depend of your sistem
    if use old tech like TTL or CMOS in SMD . Do you have schematic diagrams for this machine?
    3a) Do you have some backup of your system O.S.?
    4) If you have, can be send to me, for guide to you to more Deep with this matter?
    Thank you in advance, do not hesitate to contact me.
    Regards
    superchock@yandex.com
     
  5. Sivakumar

    Sivakumar New Member

    Joined:
    Apr 2017
    Messages:
    2
    Location:
    India
    halo sir,
    I have installed 2001 model sakurai 466SIP. The system has a storage device as floppy drive. the file saved in that shows with extension .scc
    How to create that file?is there any conversion software to convert the image in pc(to be printed) to this .scc file so that ink feeding can be done automatic.
    Please give suggestions.
     
  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
    Hi sir
    he SCC file extension is used by Microsoft Visual SourceSafe.
    Microsoft Visual SourceSafe is a source control software package that is aimed at those involved in software development on the smaller scale. The latest version of this software was released in 2005.
    You can download in Internet or Windows website
    Regards
    superchock@yandex.com
     
  7. Sivakumar

    Sivakumar New Member

    Joined:
    Apr 2017
    Messages:
    2
    Location:
    India
    sir the system dont have a hard disk to save. Its an Ms-dos version program running in it. So some other ideas
     
  8. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
    Please, contact s tech or eng in computet, they can save the disk of Floppy d in another Disk or dsave it in anther memory device tool
    Regards
    superchock@yandex.com
     
  9. panosmag

    panosmag New Member

    Joined:
    Apr 2017
    Messages:
    3
    Location:
    greece
    finally i solve the problem.we had some electrician problems two days ago and because of that the pc battery had low voltage.i had to change it and then to setup the pc program because the lan options had reset.thanks for your response
     
  10. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
  11. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
  12. grover5

    grover5 New Member

    Joined:
    Jul 2017
    Messages:
    1
    Location:
    America
    Have you tried to restart it?
     

  13. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    443
    Location:
    Managua
    Sorry, You fix it Right ??
    Well if you have any question?
    Please let me know, for help you
    superchock@yandex.com
     
Loading...

Share This Page