Printing on thermoplastic polyurethanes with Mimaki UJF - 3042HG?

Discussion in 'UV' started by VAtanasova, Feb 25, 2015.

Tags:
  1. VAtanasova

    VAtanasova New Member

    Joined:
    Feb 2015
    Messages:
    1
    Location:
    Bulgaria
    Hello, when I print on thermoplastic polyurethanes phone cases with Mimaki, the print cracks up when I squiz the case. Do I need some kind of special primer? Please give some advice.
     
  2. Risu

    Risu Senior Member

    Joined:
    May 2012
    Messages:
    95
    Location:
    Finland
    There is flexible inks also, maybe those will works better? LH-140 and the new one LH-200?
    Or wipe slightly with Xylen=primer. ypu can find Xylen from paint/hard wareshop c. 10,-/litr


    ops, old discussion
     
Loading...

Share This Page