Presstek DI34 - Laser replacement?

Discussion in 'DI Presses' started by Ham1056, Mar 23, 2022.

  1. Ham1056

    Ham1056 Member

    Joined:
    Aug 2015
    Messages:
    13
    Location:
    NB,Canada
    Hello:

    We are now getting lines or faint areas on the plates of our DI34. We have checked all other faults & now assume it's the lasers. Never replaced & going on 15 years, so long over due for replacement. Question...is the entire laser assembly replaced or just the laser head? Suggestions would be appreciated for what actual parts to replace.

    Thanks
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,409
    Location:
    Managua,Nicaragua
    Normally you can go to the Screen replacement of Laser.

    This is will give the laser Diode situation, and you need ONLY replce the Diode Laser.

     
  3. Ham1056

    Ham1056 Member

    Joined:
    Aug 2015
    Messages:
    13
    Location:
    NB,Canada
    Thank you Chock
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,409
    Location:
    Managua,Nicaragua
    ok. Sir.

     
  5. Ham1056

    Ham1056 Member

    Joined:
    Aug 2015
    Messages:
    13
    Location:
    NB,Canada
    Would have any access to DI laser Diode replacement manual or guide?
     
  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,409
    Location:
    Managua,Nicaragua
    Did you replace it sir?
     
  7. Ham1056

    Ham1056 Member

    Joined:
    Aug 2015
    Messages:
    13
    Location:
    NB,Canada
    Not yet, not sure where to start...I have been trying to find online how to replace them for the Presstek DI but no luck
     

  8. CARD ID

    CARD ID New Member

    Joined:
    Jul 2022
    Messages:
    2
    Location:
    Romania
    It is easy to replace diode. New diode could be on same edge or you will need to adjust it. all is mechanic adjutment.
    Nothing complicate.
     
Loading...